ESI 40 Business Phone Betriebsanweisung PDF herunterladen (Seite 86)

User’s Guide Using Esi-Link

H.2

Programmable feature keys and Esi-Link: an introduction

With Esi-Link, you assign dialing information to your ESI phone’s programmable feature keys in the usual way —

i.e., if a remote location station or mailbox is to be assigned to a programmable feature key, enter the location

number followed by the station’s extension number or the mailbox number.

Note: Programmable feature key lamp status of a remote location extension will appear only if the extension is

included in the “published” extension list of the remote location. Contact your System Administrator if you

need more information about published extensions.

Tip: You can use direct programming (see page C.2) to program Esi-Link locations and extensions.

Examples

Assigning a programmable feature key for extension 135 in location 712

1. Hold down the desired programmable feature key for at least two seconds to enter programming mode.

2. Dial 7 1 2 1 3 5.

Note: You can also use Location Dex (see page H.8) to select the remote location number.

3. Press the feature key again.

Programming a call-forwarding key to extension 135 in location 712

1. Hold down the desired programmable feature key for at least two seconds to enter programming mode.

2. Dial 5 6 5 (the ESI system’s call-forwarding code [see “Optional features,” page F.14]).

3. Dial 7 1 2 1 3 5.

Note: You can also use Location Dex (see page H.8) to select the remote location number.

4. Press the feature key again.

Note: If you regularly forward to a particular remote location extension, you should also assign your mailbox

to a Remote Virtual Mailbox Key (see page H.7) at that remote location extension.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 108 109

Keine Kommentare

ESI 40 Business Phone Betriebsanweisung Seite 86