The Hard Disk Sampler Tool Kit ! GIGAStation Owner’s Manual www.egosys.net
9Hardware Installation GIGAStation PCI card
10To install the GIGAStation card in your computer: 1. Turn off your computer. Leave it plugged in so that it is grounded. 2. Open the computer case
11GS2120 MIDI Interface To install the GS2120 card in your computer: 1. You require one empty slot close to the GIGAStation. 2. Connect the GS2120
124. Check to see that the GS2120 is firmly in place. 5. Locate the MIDI cable connector at the back of the computer. 6. Connect all 4 MIDI connec
13CHAPTER 3. Software Installation After completing the installation of hardware for the GIGAStation, you need to install its software to use under W
143. Windows will now copy the necessary files to the system folder. 4. Windows has now completed installing the GIGAStation driver.
155. After installing the driver for the GIGAStation, Windows will automatically detect the “GS2120,” the optional MIDI interface for GIGAStation. Ju
167. Windows will inform you that it has finished installing the new hardware. Press ‘Finish.’ 8. Go to ‘My Computer ->Control Panel -> System
17Installation under Windows 2000 1. After the hardware installation, turn on your computer. Windows will automatically recognize the GIGAStation s
183. Select “Search for a suitable driver for my device [recommended].” 4. Specify the location of the driver. Insert the provided diskette
1All rights to this document are reserved. No part of this document may be copied reproduced, or distributed in any form or by any means without the
195. Now Windows will recognize the GIGAStation after searching for the installation files in drive “A” and copy them to the system. The GIG
206. After finishing the audio driver installation, the second driver installation will begin. This step will start automatically with Windows as in
2110. After rebooting, go to ‘My Computer -> Control Panel -> System -> Device Manager.’ Check the devices under “Sound, Video, and Game con
22CHAPTER 4. GIGAStation Control Panel If you complete the GIGAStation hardware installation and software setup, you need to learn about the GIGAS
23specific port fader to adjust the level individually. To adjust a stereo level, move the mouse over the middle of the stereo ports. The selected po
24- Select the fader with the mouse cursor and use the up and down arrows of your keyboard. 2. Level Meter The Level meter displays the signal level
25to a proper level. 3. Output Level Indicator The Output Level Indicator shows the current level setting for the master outputs. Move the output le
26The Sample Rate option gives you three sample rates which are available for the GIGAStation. The GIGAStation supports 32KHz, 44.1KHz, and 48KHz. Th
27CHAPTER 5. Setting up in Audio Applications This chapter only contains the basic setup for some audio software. For more detailed info, please refe
28Power DVD On the Power DVD Main applet, click the right mouse button, and choose ‘Configuration.’ Select the ‘Audio’ Tab. Select ‘6 Speaker Ou
2Contents 1. INTRODUCING GIGA STATION ----------------------------------------------------------------- 4 FEATURES----------------------------------
30GIGA Studio LE In GIGAStudio LE, select ‘Hardware’ from ‘Settings.’ Choose ‘GIGASTATION – GSIF.’ Goto ‘Output Enabled’and check the ports that y
31* GIGA-WIRE GIGA-WIRE is the driver technology developed by Ego Sys/Audiotrak which routes the output of GigaStudio into the inputs of ASIO. It is
32 6. Open VST -> Options -> Audio Setup -> Systems. Select Monitoring as “Tape Type” or “Record Enable Type.” 7. Set ASIO Device as
33 9. Set the input channel as “Monitoring ACTIVE.” NOTE: Ensure that you set the correct input for monitoring GIGA-WIRE. For example, if you selec
34CUBASE (ASIO v.2.0) After launching Cubase, go to ‘System’ under the ‘Audio’ Menu. Select ‘ASIO2.0- GIGAStation’ for the Audio Device and ‘GIGAStat
35Specifications: 1. Output LEVEL: -10dBV Unbalanced, -10dBV Nominal, +6.5dBV Max 2. Output Impedance: 100 ohm 3. Output Attenuation: Analog -34.5
36Hard Disk Sampler Tool Kit GIGAStaion Owner’s Manual EGO SYStems Inc. Suite 1003, Shinhan Bldg. 45-11 Yoido-dong Youngdungpo-gu, Seoul, Korea Tel
3CHAPTER 1. INTRODUCING GIGA STATION Thank you for choosing GIGAStation. You have made the best choice for a Hard Disk Sampler Tool Kit as you will f
4CD-ROM Analog Input GIGAStation has an analog input port to connect the CD-ROM drive analog output that allows you to listen to audio CDs with your
5GIGAStation PCI CARD 1. Analog Outputs 1,2 2. Analog Outputs 3,4 3. Analog Outputs 5,6 4. Analog Outputs 7,8 - Four ports are stereo, so there i
6Note: In this port, the output is the same as Analog 7,8 of GIGAStation. If you want to use the digital output, you have to choose Analog outputs 7
7About the GS2120 The GS2120 is a 2 In, 2 Out MIDI Interface from EGO SYS. The GS2120 is ONLY designed to be used with the EGO SYS GIGAStation. You c
8CHAPTER 2. Hardware Installation System Requirements: To take advantage of the GIGAStation and its full capacity, the computer specifications are ve
Kommentare zu diesen Handbüchern